Linux/BEAGLEBK: Access to analog inputs

Pepito

Intellectual 580 points

Part Number: BEAGLEBK

Tool/software: Linux

I'm using SDK on BeagleBone.

For my application I need access to the analog inputs from Linux ( not PRU ).

How to make that happen?

Pepito

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

Which SDK are you using?

0 Pepito over 7 years ago in reply to Biser Gatchev-XID

Intellectual 580 points

ccs_setup_linux64_8.0.0.00016.bin
I have to do development on BeagleBone, because we don't have Ubuntu and Windows. Some hundred SUSE PC's are available ;-)
but that doesn't help.
Have a good day
Pepito

0 Biser Gatchev-XID over 7 years ago in reply to Pepito

TI__Guru**** 393215 points

I was asking what Linux SDK is running on the BBB. ccs_setup_linux64_8.0.0.00016.bin is a Code Composer Studio installer for 64-bit Linux PC. You cannot run this on BBB.

0 Pepito over 7 years ago in reply to Biser Gatchev-XID

Intellectual 580 points

Hi Biser,
I have got this link from TI: git.ti.com/.../processor-sdk-linux-04.03.00
That's what I'm currently using. No problem to change to any other version.
Have a good day
Peter

0 Biser Gatchev-XID over 7 years ago in reply to Pepito

TI__Guru**** 393215 points

So, you are running AM335x Linux SDK 4.03. Here is the ADC driver guide: software-dl.ti.com/.../Foundational_Components.html

0 Pepito over 7 years ago in reply to Biser Gatchev-XID

Intellectual 580 points

Hi Biser, looks good, going to try it out.
So I have to build the kernel modules.
Thanks
Pepito

Processors

Processors forum

Linux/BEAGLEBK: Access to analog inputs