RTOS: Sysbios aborted after BIOS_start()

Ahmed Wahdan

Other Parts Discussed in Thread: SYSBIOS

Tool/software: TI-RTOS

I'm loading the .out to the DSP1 through debugger and the sysbios aborted after BIOS_start(), and this is the ROV exception

over 7 years ago

0 ToddMullanix over 7 years ago

TI__Guru* 96960 points

Hi Ahmed,

Can you check the stack sizes to make sure they are large enough. Take a look at this for details on how to determine stack usage and options for handling exceptions: training.ti.com/debugging-common-application-issues-ti-rtos

Todd

0 ToddMullanix over 7 years ago in reply to ToddMullanix

TI__Guru* 96960 points

Hi Ahmed,

Did this get resolved?

Todd

[Update 6/11: I'm marking this as "TI Thinks Resolved". If you disagree, please post a response.]

Processors

Processors forum

RTOS: Sysbios aborted after BIOS_start()