RTOS/AM3359: Beaglebone RTOS development

Andrew Hatko

Prodigy 100 points

Part Number: AM3359

Tool/software: TI-RTOS

CCS7.pdf

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

Please post your question on the forum.

0 Andrew Hatko over 7 years ago in reply to Biser Gatchev-XID

Prodigy 100 points

I think I have just posted it on the Sitara Forum.

Should it be done differently?

Andrew

0 Lalindra Jayatilleke over 7 years ago

TI__Mastermind 30365 points

Andrew,
Could you please post the question on this e2e thread instead of attaching a .pdf with the question?

Thanks.

Lali

0 Andrew Hatko over 7 years ago

Prodigy 100 points

Part Number: AM3359

Tool/software: TI-RTOS

Hello,

We are using Code Composer Studio CCS7 and TI TTOS to develop applications for Beagle Bone Black Wireless board.

We have soldered JTAG connector in, and we are using Black Hawk probe.

Everything seems to work when we tried run and step through Hello program run under SYS-BIOS

However when we have made demo projects for TI-RTOS we were not able to run them in CCS environment.

Examples were made using gmake with limits: board bbbAM335x processor am335x.

Projects were than imported to the CCS we were not able to build example project.

Please see attached file.1803.CCS7.pdf

0 Lalindra Jayatilleke over 7 years ago in reply to Andrew Hatko

TI__Mastermind 30365 points

Andrew,
I would recommend using the TI-RTOS template as a starting point to create your custom application.
Its located at C:\ti\processor_sdk_rtos_am335x_4_03_00_05\demos\rtos_template_app

The training module to accompany this template is at software-dl.ti.com/.../presentation_html5.html
Please also see the README in the template location for more details.

Hope this helps.

Lali

0 Andrew Hatko over 7 years ago in reply to Lalindra Jayatilleke

Prodigy 100 points

We have reinstalled CCS and TI-RTOS. Now, it looks that demo works. We may assume that probem is resolved.

Andrew

Processors

Processors forum

RTOS/AM3359: Beaglebone RTOS development