RTOS/AMIC110: Porting EtherNet/IP to custom board

Kenichi Tomiiyama

Intellectual 570 points

Part Number: AMIC110

Tool/software: TI-RTOS

Hello

I'm working on porting "PRU - ICSS - EthernetIP_Adapter_ 01.00.02.00". to custom board.

I was able to check the operation with "ICE_AMIC 110 Reference Board".

The difference between the reference board and custom board is only Ethernet PHY. I am using DP83849.

Here's a question.

Can you tell me where to modify the Ethernet PHY settings?

Are there any other points to be aware of?

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

The RTOS team have been notified. They will respond here.

0 Paula Carrillo over 8 years ago

TI__Mastermind 40580 points

Hi , you can check inside examples\board for PHY files and configuration

Examples files:
C:\TI\PRU-ICSS-EthernetIP_Adapter_01.00.02.00\examples\board\common\board_dp83822.c
C:\TI\PRU-ICSS-EthernetIP_Adapter_01.00.02.00\examples\board\iceAM335x\board_phy.c

thank you,
Paula

Processors

Processors forum

RTOS/AMIC110: Porting EtherNet/IP to custom board