RTOS/TDA2EVM5777:

Hello Rishabh, thank you for the reply.

Using CCS, I imported the TI RTOS project "PCIE_idkAM572x_wSoCFile_armExampleProject" of the PCIE example found here: C:\ti\pdk_am57xx_1_0_10\packages\ti\drv\pcie\example\sample\am572x

I built the project successfully. I have a known working CCS/Target Config File setup with the TDA2x EVM5777 board, so without changing any pinmux or porting variables, I loaded the default project onto the TDA2 using JTAG. When loading the project .out file through JTAG onto the TDA2x EVM5777 board, I get an exception shortly after hitting play. I am noticing that the exception is happening when the function Task_create() is ran. Once the exception gets thrown, I see in the console window "CortexA15_0: Unhandled ADP_Stopped exception 0x20023". This should just be a BIOS configuration, correct? If I place a breakpoint on any line after Task_create() it never gets called. Any suggestions for determining what in Task_create would cause the exception?

With respect to porting between EVMs, I looked at the current configurations in the idkAM572x CIE_idkAM572x_wSoCFile_armExampleProject and the registers being accessed on the AM572x look to be the same on the TDA2. The only address that seems odd is 0x48447000 which is for VCP1_CFG_TARG. That address is defined as a peripheral base in the idkAM572x example but the TDA2 has that address under Reserved space. The AM572x TRM though has a note saying that VCP is not supported in this family of devices so is it just defined and not used?

For the number of PCIE lanes, the base example looks to be doing only 1 lane so that shouldn't be a problem with TDA2. Is that correct?