RTOS/TI-RTOS-PROC: SNMPD support

user5183560

Tool/software: TI-RTOS

hi ,

I want to support SNMP services in a new project, platform is TI-RTOS and AM335x. Does ti-rtos have an existing SNMPD module? please give me some advises.

best regards

Frank

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

The RTOS team have been notified. They will respond here.

0 Garrett Ding over 7 years ago in reply to Biser Gatchev-XID

TI__Mastermind 43296 points

Frank,

For SNMP support, please refer to processors.wiki.ti.com/.../PRU_ICSS_Profinet

-------------
This example also incorporates SNMP(Simple Network Management Protocol) using Interniche SNMP stack. SNMP is required for managing devices in the network. This application supports SNMP MIB-2(System and Interfaces), LLDP-MIB, LLDP-EXT3-MIB and LLDP-PNO-MIB which are mandated for Conformance Class B. Current implementation of the LLDP-MIBs are limited in nature as the integration between PROFINET stack and SNMP interface is incomplete. The SNMP stack available in the example is a limited version, and shuts down after 1024 SNMP requests.
--------------

Also the thread you may be interested in as well: e2e.ti.com/.../587995

Regards,
Garrett

0 user5183560 over 7 years ago in reply to Garrett Ding

Intellectual 340 points

hi Garrett，

Thanks for your reply, I'll try it right away.

best regards

Frank

Processors

Processors forum

RTOS/TI-RTOS-PROC: SNMPD support