TDA2EX17EVM: CPU Statistics option in Vision SDK

Kapil Mehta

Part Number: TDA2EX17EVM

Hello Everyone,

In vision sdk use-case , I was not able to get the CPU load statistics with option 'P' and output was like

Unable to get CPU statistics !!

so I added grpx link to have CPU load bars on HDMI display and somehow now it gives correct CPU loads on serial consoles.

So is it necessary to have grpx link in our use-case to make 'P' option working ?

Please share your inputs.

Thanks,

Kapil Mehta

over 7 years ago

0 Brijesh Jadav over 7 years ago

TI__Guru**** 495015 points

Kapil,

GRPX link is just used to display those bars, not required for getting stats..

Rgds,
Brijesh

0 Chetan Matad over 7 years ago in reply to Brijesh Jadav

TI__Expert 3970 points

Kapil ,

How much load do you see .?

Regards
Chetan.M

0 Kapil Mehta over 7 years ago in reply to Chetan Matad

Genius 3710 points

Hi Chetan,

After i added grpx link and when i see using 'P' option it is 28.1% for IPU1_0 , 1.5% for IPU1_1 ,6.6% for A15 and 49.8% for DSP .

I will again try without grpx link as Brijesh suggested , getting stats should work without grpx link.

Thanks,

Kapil Mehta

0 Chetan Matad over 7 years ago in reply to Kapil Mehta

TI__Expert 3970 points

Hi Kapil ,

Any update on this

Regards
Chetan.M

Processors

Processors forum

TDA2EX17EVM: CPU Statistics option in Vision SDK