• Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Debug, emulate and programming EVMDM642 with PCI drivers... (...and without xds5xx emulator)

Daniboy
Prodigy 150 points

Hello,

I'm brazilian MSc student and I'm trying to programming an EVM we have in our University, the EVMDM642.

Unfortunatelly we don't have the xds5xx emulator (and is difficult toget this, fist money, second burocracy and third shippent issues).

There is some Valley Tech PCI drivers availeble for free in the Spectrum Digital EVM website, I try these to program my EVM, but without success. 

Does anyone could help me wit this issue, Does the PCI drivers are made for this porpouse? There is another way to program and communicate with the EVM 642?

thanks in advance,

Daniboy

  • TI__Mastermind 41665 points

    The Valley Tech PCI drivers are only for general purpose communication (such as PCI communication in your end application) and not for debugging the DSP, they cannot be used to interface to Code Composer Studio (CCS). You will need some form of XDS class emulator to work with CCS on the DM642 EVM board, though these are typically expensive. One lower cost emulation option that may be available one day is the XDS100, however currently it does not support the DM642 device.