TDA2E: Jumbo Frames is Enabled. While building application I am getting error

Ravikanth Pamuru

Prodigy 10 points

Other Parts Discussed in Thread: TDA2E

art Number: TDA2E

Hi,

Please find the changes made to enable the Jumbo packets in NSP (nsp_gmacsw_4_12_00_00) as well as NDK (ndk_2_24_00_11)

1.In NSP gmacsw_config.c file, pGMACSWConfig->PktMTU = 2000U;

2. In NPS nimu_ndk.c file, pNETIFDevice->mtu = 2000;

3.For NDK configurations, Changed NdkConfigGlobal.pktSizeFrameBuf = 2048;

4.Please find the NDK package.bld files changes below:

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/791/NDK_5F00_package.7z

Please find the image of the application error attached.

Please help me resolving this issue.

Thank you

REgards

Ravikanth.P

over 7 years ago

0 Prasad Jondhale over 7 years ago

TI__Mastermind 27743 points

Hello Ravi,

Are you able to build NDK with modifications for Jumbo packets?

If yes, please share full build log for application failure. If not, please modify your query to "NDK build failure" so that it can be assigned to NDK team.

Note - Dont share any project confidential information on public e2e, use e2eprivate or other private means.

0 Prasad Jondhale over 7 years ago in reply to Prasad Jondhale

TI__Mastermind 27743 points

Issue is being debugged in the private e2e. Closing this thread.

Processors

Processors forum

TDA2E: Jumbo Frames is Enabled. While building application I am getting error