Linux: J6 DRA752xxx_linux: MediaLB 6-pin port register configuration enabling communication with MOST INIC OS81110

manju gunnaiah

Tool/software: Linux

Hello,

I'm looking for help in configuring the MediaLB 6-pin port of the J6 processor inorder to initiate communication with MOST INIC OS81110 controller.

Please kindly provide the register configuration Read/Write steps for proper initialization/de-initialization of the MediaLB 6-pin port.

This is for Linux driver platform initialization.

over 7 years ago

0 Srirama Govindarajan over 7 years ago

TI__Expert 8250 points

HI
We do not have driver for MLB on linux - typically customers engage with 3P development house for the MLB stack/drivers

0 manju gunnaiah over 7 years ago in reply to Srirama Govindarajan

Expert 1715 points

Hello Srirama,

I need just,

MLB register settings and initialization steps to configure MLB 6pin port for communication- turn on.

MLB register settings and de-initialization steps to turn it off.

0 manju gunnaiah over 7 years ago in reply to Srirama Govindarajan

Expert 1715 points

I need just MLB port register set initialization steps to configure for MLB 6-pin port. MLB 6-pin port register set de-initialization steps to turn off and keep it in default state.

0 Stanislav Stilyanov over 7 years ago in reply to manju gunnaiah

TI__Mastermind 18010 points

Hi Manju,
Did you manage to configure the MLB?
I just wanted to point to the J6 TRM sections:
- MLB Programming Guide
- MLB Register Manual

I believe you can find your answers there. For example I noticed that 6-pin is enabled in MediaLB Control 0 Register (MLB_MLBC0).

Regards,
Stan

Processors

Processors forum

Linux: J6 DRA752xxx_linux: MediaLB 6-pin port register configuration enabling communication with MOST INIC OS81110