AM5748: EVM gerber files

TSRDM

Part Number: AM5748
Other Parts Discussed in Thread: AM5728

Hello e2e Sitara Team, our customer is using our AM5728EVM as a reference for their design. They would like to review our AM5728 EVM layout in detail however, they do not have Allegro to view our layout files.

They asked if we could provide the Gerber files which potentially could then be converted to another format such that they can view the layout.

Is there a way to get our customer access to the AM5728EVM gerber files? Or, do you have any additional suggestions on how they can move forward?

Our customer is using layout/PCB tools from Zuken

Thanks

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

Hi,

Allegro have a free viewer available: www.cadence.com/.../allegro-downloads-start.html

0 TSRDM over 7 years ago in reply to Biser Gatchev-XID

TI__Prodigy 690 points

Hello, thank you for the link for Allegro. What our customer would like to do is "convert" the Allegro files so they can be viewed in Zuken tools. Is there a way to do this?

Thanks

0 Bill Taboada over 7 years ago in reply to TSRDM

TI__Mastermind 42545 points

Hi Dave,

We do not use the Zuken tools so we don't have any knowledge about performing the conversion. I suggest you contact your Zuken technical support group and ask if the conversion can be done. The Allegro free viewer will allow you to view the database in detail, query and highlight traces and components and measure lengths. It's pretty easy to use.

Regards, Bill

Processors

Processors forum

AM5748: EVM gerber files