* Custom board (AM3354)
* eMMC connected at MMC1
* SD card cage at MMC0
* SYSBOOT[4:0] = 1 1 1 0 0 (-> MMC1 MMC0 UART0 USB0)
When connecting 5V power, it boots from MMC0 (SD Card) not MMC1. (If SD Card is not inserted, it shows "CCCCCC.....".)
When doing RESET, then it boots from MMC1 (eMMC).
What will be the problem?
How to make it boot from MMC1 (eMMC) when connecting 5V power cord?
Thanks and regards,
Hayden
