TDA2: Dose TDA2X have an autorun script?

user5227399

Part Number: TDA2

Hi,

I want TDA2X to be able to select sensor I specify and load SRV usecase automatically when power on. What do I need to do? \

Regards,

Daniel

over 8 years ago

0 Suryamani Jena over 8 years ago

TI__Expert 3720 points

Hi,
Do you want to enable in case of BIOS or Linux ?

Regards
Surya

0 user5227399 over 8 years ago in reply to Suryamani Jena

Intellectual 470 points

Hi, Surya,
Both of them are needed.

Regards,
Daniel

0 Suryamani Jena over 8 years ago in reply to user5227399

TI__Expert 3720 points

Hi Daniel,
No such script is there
But with few modifications
i.e by disabling read char and hard coding the demo use-case number you can still do it

In case of BIOS:
-------------------------
1. Define CHAINS_DISABLE_GET_CHAR in file chains_main_bios.c (under vision_sdk\apps\src\rtos\common)
2. Copy the SRV UC config (refer chains_main_bios_multi_cam.c --> switch case 2)
inside below block in file chains_main_bios_viison.c (under vision_sdk\apps\src\rtos\common)
#ifdef CHAINS_DISABLE_GET_CHAR
#endif
3. Rebuild the vision_sdk

In case of Linux:
-------------------------
1. Instead of ch = getchar() in file chains_main.c (under vision_sdk\apps\src\hlos\adas\src\common)
hard code the demo use-case number
ch = 2 (to select mulicam uc )
ch = 3 (to select srv uc)
2. Rebuild the vision sdk

Regards
Surya

0 user5227399 over 8 years ago in reply to Suryamani Jena

Intellectual 470 points

Hi Surya,

Thanks for your reply. I will try it.

Regards,
Daniel

Processors

Processors forum

TDA2: Dose TDA2X have an autorun script?