TDA2EVM5777: OV10640 with ISP GW4200 integration to TDA2EVM5777

Willson Toh59

Part Number: TDA2EVM5777
Other Parts Discussed in Thread: TIDA-00162

Dear Ti

I have a sensor which is OV10640 with ISP GW4200 and with a daughter board. I would like to check with you do i still need to make any change to the code as i am have trying getting the sensor to work.

over 7 years ago

0 Brijesh Jadav over 7 years ago

TI__Guru**** 481675 points

Hi Wilson,

You want to capture it on TDA2Ex? Over which interface?
May require minor changes in VSDK to get it work. But first is it brought up on the TDA2Ex?

Regards,
Brijesh

0 Willson Toh59 over 7 years ago in reply to Brijesh Jadav

Intellectual 840 points

Dear Brijesh

i am using TDA2EVM5777 with a daughter board TIDA-00162.

0 Brijesh Jadav over 7 years ago in reply to Willson Toh59

TI__Guru**** 481675 points

Hi Wilson,

You would also require multi-deserializer board. TIDA00162 board has UB913 serializer in it, but EVM does not have any deserializer..

Rgds,
Brijesh

0 Willson Toh59 over 7 years ago in reply to Brijesh Jadav

Intellectual 840 points

Dear Brijesh

Sorry the board where are using is SAT0089(deserializer) instead not TIDA00162.

0 Brijesh Jadav over 7 years ago in reply to Willson Toh59

TI__Guru**** 481675 points

Hi Wilson,

Is this issue resolved? Let me know if you are still facing this issue?

Rgds,
Brijesh

Processors

Processors forum

TDA2EVM5777: OV10640 with ISP GW4200 integration to TDA2EVM5777