• Locked Locked
  • Replies 2 replies
  • Subscribers 99 subscribers
  • Views 349 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM6437 DVDP DSP program analysis

Jogging Song
Intellectual 685 points
Other Parts Discussed in Thread: TMS320DM6437

Hi,all
   Recently, I got a DM6437 EVM board with DVDP. A demo program is

provided to show the  functions of DVDP. In the document(TMS320DM6437 DVDP Getting Started
Guide), there is a  description of host software.But the DSP program doesn't get analyzed like this.

Is there any document about the DSP program of DM6437 DVDP demo software?


Thanks
Jogging

  • TI__Mastermind 41665 points

    For the demo itself I believe the best documentation is the power point file within C:\dvsdk_1_01_00_15\dm6437_demo_1_30_00\doc, though this is not too in depth of a discussion, it does give a good overview of the flow of the software.

  • in reply to Bernie Thompson TI
    Intellectual 315 points

     

     

    Bernie Thompson said:

    For the demo itself I believe the best documentation is the power point file within C:\dvsdk_1_01_00_15\dm6437_demo_1_30_00\doc, though this is not too in depth of a discussion, it does give a good overview of the flow of the software.

     

    hello I have a similar problem with my board, I get a TMS320DM6437,  and when I try to run the demos with the PC Host Application, the host-side component of the demo application, dont can´t get the IP direction, the message that apears is this "could not locate any DM6437EVM demo-running targets on the network"

    I've follow all the steps exactly like is in TMS320DM6437 DVDP Getting Started Guide,

    someone can help, I´ve run out all my ideas....