Linux: AM335x eMMC boot

Vamsi Siddhani

Expert 1420 points

Tool/software: Linux

Hi,

I am new to this development. I want to boot my custom board from eMMC only. Not from SD Card.

I am using ti-processor-sdk-linux-am335x-evm-05.00.00.15.

Anybody tell me how to make my board to boot up from eMMC.

thanking you.

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

What processor is this?

0 Biser Gatchev-XID over 7 years ago in reply to Biser Gatchev-XID

TI__Guru**** 393215 points

Sorry, I didn't notice you were mentioning the AM335x SDK.
You will need the proper SYSBOOT settings. See section 26 in the AM335x TRM Rev. P for details. Also you will need to partition and program the eMMC. This is covered in the U-boot documentation: software-dl.ti.com/.../Foundational_Components.html

0 Vamsi Siddhani over 7 years ago in reply to Biser Gatchev-XID

Expert 1420 points

How to test gpio pins on am335x by giving input.

0 Biser Gatchev-XID over 7 years ago in reply to Vamsi Siddhani

TI__Guru**** 393215 points

Your last post is not related to the thread subject. Please open a new thread for it and provide full details of what you want to achieve.

Processors

Processors forum

Linux: AM335x eMMC boot