How to access PRU in AM1808?

zhu

Expert 1925 points

Other Parts Discussed in Thread: AM1808

I downloaded PRU Software Development Package, after a check, i found it seems only include host examples of DSP.

Are there any examples for the host of AM1808?

over 14 years ago

0 melissaw over 14 years ago

TI__Genius 15900 points

Hi Zhu,

We are currently working on releasing example code that uses the host ARM processor. These examples will be available on Wed., 11/17.

Regards, Melissa

0 zhu over 14 years ago in reply to melissaw

Expert 1925 points

Hi, Melissa,

Great, that's good news.

Thank you.

Regards, Zhu.

0 welt7 over 14 years ago in reply to zhu

Prodigy 90 points

where? not found...

0 melissaw over 14 years ago in reply to welt7

TI__Genius 15900 points

The PRU Linux application loader and Linux-based example code are now available.

Please visit http://processors.wiki.ti.com/index.php/PRU_Linux_Loader for installation instructions and user guides.

0 welt7 over 14 years ago in reply to melissaw

Prodigy 90 points

Hi，mwatkins，

Sorry, I can not get the code from the URL --“https://gforge.ti.com/gf/project/pru_sw/ ”，

Unable to open the URL.

Use the command- "host$ svn export https://gforge.ti.com/svn/pru_sw ", not the same.

0 melissaw over 14 years ago in reply to welt7

TI__Genius 15900 points

We think the project site is set up correctly. Can you reiterate what steps you are taking?

The project is hosted at https://gforge.ti.com/gf/project/pru_sw/. However, to access the code, the command "svn export https://gforge.ti.com/svn/pru_sw" should be typed in the shell window of the host Linux workstation. This should export the code to your workstation.

0 welt7 over 14 years ago in reply to melissaw

Prodigy 90 points

I do it as you said，under Debian5..0,

However, it says "can not connect to server .."

0 melissaw over 14 years ago in reply to welt7

TI__Genius 15900 points

Are you behind a firewall or proxy? Either of these could prevent a machine from accessing the site.

0 welt7 over 14 years ago in reply to melissaw

Prodigy 90 points

Thanks mwatkins, the question has solved,

my office network has the limit

Processors

Processors forum

How to access PRU in AM1808?