CCS/LAUNCHXL-CC1352R1: People Counting and Tracking Using mmWave Radar Sensor cant find the patches

Marcus Giddings

Tool/software: Code Composer Studio

Hi All,

I have been working of the People Counting and Tracking Using mmWave Radar Sensor With Sub-1 GHz Reference Design and have got the files onto the devices and have got the examples running and I'm now looking at composing my own code the documentation references a patch that needs to be applied but I can't find it if anyone can help with this much appreciated.

over 7 years ago

0 Tomasz Kocon over 7 years ago

Guru 26200 points

Hello Marcus,

<<< I'm now looking at composing my own code the documentation references a patch that needs to be applied but I can't find it.
Which document? Link, please.
Which patch?

0 Marcus Giddings over 7 years ago in reply to Tomasz Kocon

Prodigy 130 points

www.ti.com/.../tidued6.pdf this is a link to the document in section 3.1.2.4(Building the Firmware) a patch is referenced but i dont know what the patch is or where to find it.

0 Tomasz Kocon over 7 years ago in reply to Marcus Giddings

Guru 26200 points

Hi Marcus,

the document, to which a link you have provided says:

Go to the link above, than to the Software section and download TIDA-010022 Firmware

This firmware contains patches you need.

0 Justin Curewitz over 7 years ago in reply to Tomasz Kocon

TI__Mastermind 28055 points

Hi Marcus,

This is correct. Please note the patch is for the CC1352 device firmware.

Regards,
Justin

0 Marcus Giddings over 7 years ago in reply to Tomasz Kocon

Prodigy 130 points

thank you I just couldn't see the wood for the trees

Processors

Processors forum

CCS/LAUNCHXL-CC1352R1: People Counting and Tracking Using mmWave Radar Sensor cant find the patches