TDA3: I2C sample code

Khai Trinh

Part Number: TDA3

Hi,

Can I use bsp_examples_i2c_led_blink from the TDA2px and test it in TDA3 RVP? We would like to check out I2C functionality so we know if it will work with our I2C device on the custom board.

Thanks,

--Khai

over 7 years ago

0 Rishabh Garg over 7 years ago

TI__Guru 55685 points

Hi,

This example is tested for TDA3xx EVM. You will need to port it for TDA3xx RVP board.

Regards,
Rishabh

0 Khai Trinh over 7 years ago in reply to Rishabh Garg

Genius 4140 points

Where is the source code for bsp_examples_i2c_led_blink? I couldn't locate it in the Vision SDK.

Thanks,

--Khai

0 Rishabh Garg over 7 years ago in reply to Khai Trinh

TI__Guru 55685 points

What is the Vision SDK version you are using?

Regards,
Rishabh

0 Khai Trinh over 7 years ago in reply to Rishabh Garg

Genius 4140 points

3.04

0 Rishabh Garg over 7 years ago in reply to Khai Trinh

TI__Guru 55685 points

Hi,

I2C example is here: PROCESSOR_SDK_VISION_03_04_00_00\ti_components\drivers\pdk_01_10_00_08\packages\ti\drv\bsp_lld\i2c\examples\i2c_led_blink.
It is a standalone example and not a Vision SDK use case.

Regards,
Rishabh

0 Khai Trinh over 7 years ago in reply to Rishabh Garg

Genius 4140 points

OK. Thanks. Looking it up with a wrong name to begin with.

0 Rishabh Garg over 7 years ago in reply to Khai Trinh

TI__Guru 55685 points

Hi,

Please mark the post that answers you query as "This resolved my issue" and close the thread.

Regards,
Rishabh

Processors

Processors forum

TDA3: I2C sample code