TMS320VC5505 EVM interfaced with PulseOx MDK

shan54218

Other Parts Discussed in Thread: TMS320VC5505

Hai,

I am using TMS320VC5505 EVM , I want to interface PulseOx MDK with that, The CD comes along with the PulseOx MDK th codes in that is working but with some warnings, As a result i cant able to get the Heart beat and pulse in in digital values in my hardware as well as in the system display..... suggestions please........

over 14 years ago

0 Peter Chung over 14 years ago

TI__Expert 8065 points

Shan,

I am afraid I can't help much with the information provided.Could you please provide detail information?

Are you saying that you do not have stable HR number or SpO2 number? or you are not getting SpO2 waveform at all?

Do you see a green waveform on the LCD display?

When you disconnect the Pulse Ox sensor, what do you see?

I think you can use the PC software to display the waveform on computer, could you give me some screen shots of the images?

Regards,

Peter Chung

0 shan54218 over 14 years ago in reply to Peter Chung

Intellectual 645 points

Hello Chung,

Thanks for your reply but i found the solution for my problem in your provious post from the following link , thing i need to change my sensor, because i am usng the NELLCOR SpO2 Sensors, Once again thanks for the post.

http://e2e.ti.com/support/dsp/tms320c5000_power-efficient_dsps/f/109/p/68079/266968.aspx#266968

http://e2e.ti.com/support/dsp/tms320c5000_power-efficient_dsps/f/109/t/58695.aspx

Processors

Processors forum

TMS320VC5505 EVM interfaced with PulseOx MDK