CCS/TMS320C6748: problem with DSP processor kit of TMS320C6748

TURPATI SUMAN46

Part Number: TMS320C6748

Tool/software: Code Composer Studio

Good evening sir,

Sir, i have tms320c6748 dsp kit, with the kit, in the manual using audio playback programme run with my dsp processor kit i faced the following problem .

C674X_0: Error connecting to the target: (Error -1180 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.0.872.0)
C674X_0: GEL: Encountered a problem loading file: C:\Users\lenovo\workspace_v5_3\audioplay\Debug\audioplay.out Could not open file

Sir, please help me how to solve this problem

over 7 years ago

0 Yordan Kovachev over 7 years ago

TI__Guru**** 161600 points

Hi,

Check this thread:
e2e.ti.com/.../383990

Best Regards,
Yordan

0 TURPATI SUMAN46 over 7 years ago in reply to Yordan Kovachev

Intellectual 255 points

sir, the problem was not solved, igot the following error
C674X_0: GEL: Encountered a problem loading file: C:\Users\lenovo\workspace_v5_3\audioplay\Debug\audioplay.out Could not open file.
can you help me please provide c code for basic audio playback, using tms320c6748

0 Yordan Kovachev over 7 years ago in reply to TURPATI SUMAN46

TI__Guru**** 161600 points

Hi,

This is a problem in your application. You probably didn't create the project properly. Are you able to connect to your board with CCS?

Best Regards,
Yordan

0 TURPATI SUMAN46 over 7 years ago in reply to Yordan Kovachev

Intellectual 255 points

yes sir, for non real time programs i have got output sir, but for real time programmes i have got this problems,
Sir, here iam using CCSv5.3 and tms320c6748 kit,

0 TURPATI SUMAN46 over 7 years ago in reply to TURPATI SUMAN46

Intellectual 255 points

As per the instructions of user manual , i followed for real time programmes.

0 TURPATI SUMAN46 over 7 years ago in reply to TURPATI SUMAN46

Intellectual 255 points

Sir, here iam attaching the snapshots of my programme and error,

sir please solve my problem

0 Yordan Kovachev over 7 years ago in reply to TURPATI SUMAN46

TI__Guru**** 161600 points

Hi,

You have a problem even in the build phase in loop.c:
Could not open file "L138_aic3106_init.h"

Check where this file is located and if you have the required access to its containing folder. Check if you have the path included in your project.

Best Regards,
Yordan