AM3517 Experimenters Kit - Configuration File

Rajah

Other Parts Discussed in Thread: AM3517

Hi Guys,

I have the AM3517 experimenters kit with CCS Version: 4.2.0.10017. The board has a USB based FTDI serial port and also a 14 pin JTAG header. I have a Blackhawk USB1000v2 debugger also. Does anyone have a target configuration file for the JTAG? I would appreciate your help.

Thanks,

Rajah

over 14 years ago

0 Rajah over 14 years ago

Intellectual 410 points

Any help guys? I am not able to connect to my AM3517 board from CCS...thanks in advance.

Rajah

0 JJD over 14 years ago in reply to Rajah

TI__Guru* 86550 points

You should be able to use the same configuration files that OMAP35xx uses.

Regards,

james

0 Rajah over 14 years ago in reply to JJD

Intellectual 410 points

Hi James,

Thanks for your reply, I tried OMAP35xx configuration and had no success. I get the following error message when I start a debug session in CCS 4 (Version: 4.2.0.10017)

Error connecting to the target:

Error 0x80002240/-150

Fatal Error during: Initialization, OCS, Control,

I have attached the target config file that I am using. Can you please tell me what is missing?

7331.AM3517_BH_USB100V2.zip

Thanks,
Rajah

Processors

Processors forum

AM3517 Experimenters Kit - Configuration File