RTOS/TDA2EXEVM: SYSTEM: ERROR: Link is already registered

Nitin Kumar

Part Number: TDA2EXEVM

Tool/software: TI-RTOS

Hi,

I am trying to create a new link in Vision SDK for A15 processor but it is giving me "SYSTEM: ERROR: Link is already registered at linkId = 96 !!!" error. Am I missing anything here?

Thanks in advance

Nitin

over 6 years ago

0 Brijesh Jadav over 6 years ago

TI__Guru**** 476595 points

Nitin,

Are you adding new linkid in the enum SYSTEM_A15_0_LINK_IDS and making link id using macro A15_0_LINK in the usecase?

Rgds,
Brijesh

0 Nitin Kumar over 6 years ago in reply to Brijesh Jadav

Prodigy 245 points

Yes I am adding new linkid as below

SYSTEM_LINK_ID_XYZDATARXA15_0=
A15_0_LINK((uint32_t)SYSTEM_LINK_COMMON_LINKS_MAX_ID+29U)

} SYSTEM_A15_0_LINK_IDS;

And initializing the link at below location

vision_sdk/apps/src/hlos/modules/XYZxA15/XYZDataRxA15Link_tsk.c

0 Brijesh Jadav over 6 years ago in reply to Nitin Kumar

TI__Guru**** 476595 points

It seems someone is already registered for this link id.
can you check 29 is the last number in A15 link ids?

0 Nitin Kumar over 6 years ago in reply to Brijesh Jadav

Prodigy 245 points

Yes Brijesh, Its the last number and created by us only. And I think other than A15_0_LINK it is being used for IPU1_0_LINK but that should not affect it. Shall I increase 29 by 5 or 10 and see?

0 Brijesh Jadav over 6 years ago in reply to Nitin Kumar

TI__Guru**** 476595 points

can you print value of SYSTEM_LINK_ID_XYZDATARXA15_0?
it should not be 96..

0 Nitin Kumar over 6 years ago in reply to Brijesh Jadav

Prodigy 245 points

Hi Brijesh, as I posted in query is was printing 96 I changed added new linkId with 33 from 29, now it is working.

Thanks

Processors

Processors forum

RTOS/TDA2EXEVM: SYSTEM: ERROR: Link is already registered