Linux: Start PVRscope fail with DRA770 microprocessor

Giuseppe Noto

Prodigy 80 points

Tool/software: Linux

Hello,

we have tried to use PVRscope for GPU load measuring.

When we start the program we have the "Initialised services connection" error.

Is it possible that in our graphics driver are not enabled the "PVRscope Services" ?

If response is affirmative, how can we enable "PVRscope Services"?

Thanks for help

over 6 years ago

0 Anand Balagopalakrishnan over 6 years ago

TI__Expert 5130 points

Hi,

Please confirm if you are using Linux / Android. If you are using Linux, what is the version of SDK being used?

The SoC performance tool uses pvrscope to measure the GPU performance.
processors.wiki.ti.com/index.php

Regards,
Anand

0 Yordan Kamenov over 6 years ago in reply to Anand Balagopalakrishnan

TI__Mastermind 42515 points

Hi Guiseppe,

We haven't heard back from you, I'm assuming you were able to resolve your issue.
If not, just post a reply below (or create a new thread if the thread has locked due to time-out).

Regards,
Yordan

0 Giuseppe Noto over 6 years ago in reply to Yordan Kamenov

Prodigy 80 points

Hi,
I solved my issue.
The problem was that in our system the PVRscopeService.so library was not installed.
With this library PVRscope now is running.

Thanks

Processors

Processors forum

Linux: Start PVRscope fail with DRA770 microprocessor