RTOS/AMIC110: PDK board library customization and Bootloader for custom board

vipin mishra57

Intellectual 340 points

Part Number: AMIC110

Tool/software: TI-RTOS

Hi Garrett,

As per below conversation

https://e2e.ti.com/support/processors/f/791/p/754524/2831383#2831383

I am createing ne wthread to contnuie development.

I am able to compile and run the TI example project for AMIC110.

Now i want to create project for my application.

How can i create my project from scratch (For custom board)?

Also guide me how i can update the board library from PDK to align with custom board.

In my application I need PRP and HSR both user Configurable.

Regards,
Vipin Mishra

over 7 years ago

0 Garrett Ding over 7 years ago

TI__Mastermind 43296 points

Vipin,

You can modify the ethercat_slave_full_AMIC11x_arm.txt file in
PRU-ICSS-EtherCAT_Slave_01.00.07.02\protocols\ethercat_slave\projects\ccsproject_args\AMIC11x
to add your application files or just manually add your files/function into the existing CCS project.

Regarding the processor SDK board library porting, please take a look at the training guide 'Port' section - training.ti.com/application-development-using-processor-sdk-rtos

The user guide section custom board addition is mainly targeting to AM572x, but may help understand the flow as well.
software-dl.ti.com/.../index_board.html

The application note of Processor SDK customization describes the steps for pinmux update - www.ti.com/.../sprac32a.pdf

Regards,
Garrett

Processors

Processors forum

RTOS/AMIC110: PDK board library customization and Bootloader for custom board