Compiling UBL Code

NeeravPatel

Hi,

I have been looking at the Serial Utility that TI recommends to download the UBL to the chip. I see that there is UBL Code present and I have been looking into it, but how does one compile all this code to the bin file that we send via the UART.

Thanks

over 16 years ago

0 Constantine over 16 years ago

Expert 2995 points

You may find the source on extarnet site. Also you may boot and install DM355 from SD card.

0 Bernie Thompson TI over 16 years ago

TI__Mastermind 41665 points

NeeravPatel said:
how does one compile all this code to the bin file that we send via the UART.

It looks like the UBL was originally meant to be built with Code Composer Studio (CCS) as it has a .pjt file in the dvsdk_1_30_01_41\PSP_01_20_00_014\board_utilities\ublNAND\build directory, so you would either have to open up and build this project file in CCS or you would have to create a makefile for it to be built in Linux.

0 Jared7 over 15 years ago in reply to Bernie Thompson TI

Prodigy 140 points

Has anyone created such a makefile, and if so, could it be posted?

Processors

Processors forum

Compiling UBL Code