AM3352: AM3352 - Noise Requirements

Nadav Yafe

Part Number: AM3352

Hi,

I am looking for a document showing what are the noise and DC level recruitment's per rail for the AM3352. i already checked datasheet.

This is not mentioned in the datasheet and I couldn’t find one on the e2e and on TI website.

I searched via google as well.

Thanks,

Nadav

over 6 years ago

0 Biser Gatchev-XID over 6 years ago

TI__Guru**** 393215 points

Hi,

All AM335x operating voltages must be within the limits specified in section 5.5 of the AM335x Datasheet Rev. J. You will find additional DPLL power supply requirements in section 6.1.4.

0 Nadav Yafe over 6 years ago in reply to Biser Gatchev-XID

Prodigy 130 points

Hi Biser,

i am looking for a table similar to section 6.1.4 but for all power rails. margins alone are (as mentioned in 5.5) are not good enough.

this is standard data that vendor usually provide.

Thanks,

Nadav

0 Biser Gatchev-XID over 6 years ago in reply to Nadav Yafe

TI__Guru**** 393215 points

There is no such information. Keeping the operating voltages must be within the limits specified is the only requirement. This includes noise, spikes, etc.

0 Nadav Yafe over 6 years ago in reply to Biser Gatchev-XID

Prodigy 130 points

ok.

Processors

Processors forum

AM3352: AM3352 - Noise Requirements