CCS/AM5728: AM5728 CCS OUT TO BIN FOR evmAM5728 BOARD (Android)

user1288973

Intellectual 260 points

Part Number: AM5728

Tool/software: Code Composer Studio

Could you tell me how to transfer out file generated using CCS to AM 5728 and start it from Android command line.

It seems that it can not use the out file as it is, so Could you teach that how to convert it.

over 6 years ago

0 Praneeth Bajjuri over 6 years ago

TI__Expert 6276 points

1. What firmware? Assuming DSP, usually i use xe66 format (example on how to convert Ref: e2e.ti.com/.../513671 )
2. Look at how a firmware is loaded (Example: Pru firmware) as part of android build process. And do the same for ccs firmware image

Android should recognize the firmware image in /vendor/firmware/<ccs.xe66> as long as the linux driver that uses the firmware is loaded.

Additional refs on how to load firmware is discussed at
e2e.ti.com/.../769138
e2e.ti.com/.../742618

Processors

Processors forum

CCS/AM5728: AM5728 CCS OUT TO BIN FOR evmAM5728 BOARD (Android)