RTOS/TDA3: TDA3 automotive programming

raffaele memmolo

Prodigy 170 points

Part Number: TDA3

Tool/software: TI-RTOS

Hello,

my question is : How to change SYSBOOT switch for sbl boot by qspi on tda3x starter kit?

over 6 years ago

0 Brijesh Jadav over 6 years ago

TI__Guru**** 477995 points

Hi,

please refer to TDA3x userguide, it mentions what changes are required in boot settings to change boot mode.

Rgds,
Brijesh

0 Rishabh Garg over 6 years ago in reply to Brijesh Jadav

TI__Guru 55685 points

Hi,

You need to get in touch with D3 engineering or look at their documentation on how to change SYSBOOT.
The boot mode settings i.e. SYSBOOT[0:5] should be same as given in TRM or SBL user guide.
If SYSBOOT is available as a physical switch you can directly change the same.

Regards,
Rishabh

Processors

Processors forum

RTOS/TDA3: TDA3 automotive programming