RTOS/TDA3: TDA3x

Sergey Yakubovich

Intellectual 335 points

Part Number: TDA3

Tool/software: TI-RTOS

Hi All.

Please advise how to add SYS/BIOS to DSP1 and DSP2 of TDA3x project (i need all required steps and setups).

Thanks in advance,

Best regards,

Sergey.

over 6 years ago

0 Rishabh Garg over 6 years ago

TI__Guru 55685 points

Hi Sergey,

What is the software based on?
Is it a CCS project or based on TI provided PDK or Vision SDK?

Regards,
Rishabh

0 Sergey Yakubovich over 6 years ago in reply to Rishabh Garg

Intellectual 335 points

Hi Rishabh.

Thanks for your reply.

it is based on CCS.

Regards,
Sergey.

0 Rishabh Garg over 6 years ago in reply to Sergey Yakubovich

TI__Guru 55685 points

Hi Sergey,

Can you refer to the below:
www.ti.com/.../sprabw1.pdf
processors.wiki.ti.com/.../BIOS_Getting_Started_Guide

Regards,
Rishabh

0 Sergey Yakubovich over 6 years ago in reply to Rishabh Garg

Intellectual 335 points

Hi Rishabh.

Thanks for your reply.

I familiar with documents you sent me, but i need as follow:
There is some document that describes how to add SYS/BIOS to existing DSP1 project of TDA3?
What kind of platform file i have to use for DSP1 of TDA3?
How to create it for DSP1 of TDA3?
What information it has to contain?
What minimum config file suppose to be for DSP1 of TDA3?
And so on.
Please advice the all steps above.

Regards,
Sergey.

0 Sergey Yakubovich over 6 years ago in reply to Rishabh Garg

Intellectual 335 points

Any news?

0 Rishabh Garg over 6 years ago in reply to Sergey Yakubovich

TI__Guru 55685 points

Hi Sergey,

Unfortunately we don't have any document that lists the detailed steps for adding SYSBIOS.
My suggestion will be to create a new CCS SYSBIOS project and add your files to that project.
It will be easier compared to the other approach of adding SYSBIOS.

Regards,
Rishabh

0 Rishabh Garg over 6 years ago in reply to Rishabh Garg

TI__Guru 55685 points

Hi,

I haven't heard back from you, I'm assuming you were able to resolve your issue.
If not, just post a reply below (or create a new thread if the thread has locked due to time-out).

Regards,
Rishabh

Processors

Processors forum

RTOS/TDA3: TDA3x