Linux/AM4376: About SDk comes with a browser

It will depends on package, please see this post. In general you cannot run WebEngine on am4376 at all.

I am very sorry, I do not have one. You can compile it by yourself with these commands.

The related document for building processor-sdk-03.00.00.04-config.txt is this.

You need to enter these commands in your host computer.

$ sudo dpkg-reconfigure dash
(Select "No" when prompted)

Close the current terminal where you have executed dpkg-reconfigure dash command and open a new one.

$ sudo apt-get install git build-essential python diffstat texinfo gawk chrpath dos2unix wget unzip socat doxygen libc6:i386 libncurses5:i386 libstdc++6:i386 libz1:i386

$ wget https://releases.linaro.org/components/toolchain/binaries/5.3-2016.02/arm-linux-gnueabihf/gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf.tar.xz
$ tar -Jxvf gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf.tar.xz -C $HOME

Create or make 20GB SWAP partition as shown in this thread.

$ git clone git://arago-project.org/git/projects/oe-layersetup.git tisdk
$ cd tisdk
$ ./oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-03.00.00.04-config.txt
$ cd build
$ . conf/setenv
$ export PATH=$HOME/gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf/bin:$PATH
#----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
# Add the following to the end of <tisdk>/build/conf/local.conf before launching the last bitbake command
#----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MACHINE_FEATURES_remove = "sgx"
#----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
$ MACHINE=am437x-evm bitbake tisdk-rootfs-image