DM355 IPNC

d8661

Hello,

I would to modify the software supplied by appro to enable image capture in various resolutions. does anybody know wether it\s possible to do that, given that the 2A codecs are given as object and lib?

Thank you in advance,

Dana.

over 16 years ago

0 Bernie Thompson TI over 16 years ago

TI__Mastermind 41665 points

This sounds like a good question to run past Appro if they are providing the software. I suspect if you cannot configure the 2A codecs to support different resolutions that you would have to rebuild them to add such support, and if they are only provided as objects/libraries than it may not be possible. Unfortunately I do not have one of the Appro cameras so I have never seen their 2A documentation to know how configurable the lib is.

0 YHLShareware over 16 years ago in reply to Bernie Thompson TI

Intellectual 830 points

All,

Could anyone please show me what the difference is between Appro 2A and DM355 H3A? Many thanks.

BR,

Jeff

0 Juan Gonzales over 16 years ago in reply to YHLShareware

TI__Mastermind 37340 points

I am not certain about the Appro 2A (they would be the best to answer this), but the H3A on DM355 maps directly to the H3A hardware block described in the VPFE UG for DM355 ( http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=spruf71a). If I had to guess, it would likely be partial support for H3A.

0 *** zhou over 15 years ago in reply to YHLShareware

Prodigy 95 points

Hi,

I also want to know the difference between Appro IPNC and DM355 evm.

Especially I wonder how to port gstreamer to IPNC,and hwo to set the bootargs of IPNC to specify the fbdev.

Processors

Processors forum

DM355 IPNC