Hello,
We are looking to use theTMS230C5505 with an EEPROM. My question is, it is possible to field program the EEPROM from a running DSP, or will the DSP have to be put into reset/powered down to allow EEPROM programming?
Thanks,
James
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
We are looking to use theTMS230C5505 with an EEPROM. My question is, it is possible to field program the EEPROM from a running DSP, or will the DSP have to be put into reset/powered down to allow EEPROM programming?
Thanks,
James