DRA77P: Building sdk

Padmesh K Gopi

Expert 2610 points

Part Number: DRA77P

Hi,

I want to rebuild processor sdk for dra77p . Should i follow the document or is there any extra procedure for that ?

Regards,
Padmesh

over 6 years ago

0 Yordan Kamenov over 6 years ago

TI__Mastermind 42515 points

Hi Padmesh,

yes, the wiki you refer is the right document for building and getting started with PSDKLA.

Regards,
Yordan

0 Padmesh K Gopi over 6 years ago in reply to Yordan Kamenov

Expert 2610 points

Hi Yordan,
On referring it, i have a doubt that on using the script "./build-core-sdk.sh dra7xx-evm". So as to be board specific should i write dra7xx-evm as dra76x-evm since i find many device trees as dra76/dra77 follow the same.

Regards,
Padmesh

0 Yordan Kamenov over 6 years ago in reply to Padmesh K Gopi

TI__Mastermind 42515 points

Hi Padmesh,

it is build with the same command for dra75x (J6), dra76(J6Plus) or dra72x(J6Eco), you just use different .dtb's for the different processors.
I think U-boot should be detect the baseboard and choose the right .dtb file, you need to configure fdtfile inside uenv.txt manually if you use stackup of baseboard plus LCD, see here:
processors.wiki.ti.com/index.php

Regards,
Yordan

Processors

Processors forum

DRA77P: Building sdk