AM3359: Segger J-Link Pro support of AMIC110 and AM3359 Industrial Communications Engine hardware

Chris Yorkey

Part Number: AM3359
Other Parts Discussed in Thread: SEGGER, , AMIC110

TI Friends, Family & Team:

Our customer currently uses the Segger J-Link Pro for debugging and would like to simply know if both the AMIC110 Industrial Communications Engine as well as the AM3359 Industrial Communications Engine are both supported. It appears based on Segger's website as well as some other related online E2E Forum posts, that this is indeed the case.

Please confirm/comment?

TY,
CY

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 450031 points

Hi Chris,
I haven't personally tried it out but I believe both are indeed supported by J-Link. The device support information in CCS seems to verify this as I am able to create target configurations for both devices when J-Link is specified as the connection.

Thanks
ki

0 desouza over 6 years ago

TI__Guru**** 169754 points

Chris,

Although I don't use it thorougly, I have tested Jlink in the past with AM3359 devices and it worked well.

Segger defines what is supported by their debug probes and their list is shown at the link below.
www.segger.com/.../supported-devices.php

Regards,
Rafael

0 Chris Yorkey over 6 years ago in reply to Ki

TI__Genius 15295 points

Thanks Ki-Soo! Indeed I also found this particular reference on how to connect up Segger J-Link debuggers to the AM335x:
e2e.ti.com/.../2828961

I think we should be good to go. Thanks again.

-Chris

Processors

Processors forum

AM3359: Segger J-Link Pro support of AMIC110 and AM3359 Industrial Communications Engine hardware