CCS/TMS320C6657: TMDSEVM6657LS START UP

chandra mouli1

Prodigy 20 points

Part Number: TMS320C6657
Other Parts Discussed in Thread: TMS320F2811

Tool/software: Code Composer Studio

Hi All

I am new to work on tms320c6657 .i request to suggest the best path to get into at a good pace .

I Previously worked on lpc controllers, tms320f2811 processor.

I am using ccs 7

I need some sample code bundles and procedure to work on .

Thanking You All

Mouli

over 7 years ago

0 Yordan Kovachev over 7 years ago

TI__Guru**** 161600 points

Hi,

The best way to start is going through the training videos:
www.ti.com/.../support

See the links in Training & events and Videos section on the above link.

You can download the Processor SDK RTOS from here:
www.ti.com/.../processor-sdk-c665x

The Software Developers Guide for TI RTOS is located here: software-dl.ti.com/.../index.html

All technical documentation for this SoC is located on this link: www.ti.com/.../technicaldocuments

Best Regards,
Yordan

0 chandra mouli1 over 7 years ago in reply to Yordan Kovachev

Prodigy 20 points

Thank You Yordan,

The info you have suggested doesnt aim at designing without RTOS.

I mainly require info regarding working on dsp as i worked on different controllers(BareMetal).

Require your suggestions and info regarding.

0 Yordan Kovachev over 7 years ago in reply to chandra mouli1

TI__Guru**** 161600 points

Hi,

The training series & software developers guide in my answer above are the go to place for setting up your environment and connecting CCS to your board and start developing on it.

Best Regards,
Yordan

Processors

Processors forum

CCS/TMS320C6657: TMDSEVM6657LS START UP