• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 535 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/TDA2SX: Surround view use case in TDA2x

NAREN K
Prodigy 200 points
Part Number: TDA2SX

Tool/software: Linux

Hello,

We are looking to set up a demo for Surround view use case on TDA2X board.
We are looking for an out of the box solution which we can showcase.
We have finalized following set up to order. Please let us know your feedback if this will work out of the box with vision SDK. 
Also, it will be great if we are guided with the exact use case to be run from vision SDK HLOS side.

Board

Link for purchase (TI or Spectrum)

Project

 tda2x

http://www.spectrumdigital.com/tda2x-vision-evaluation-module-kit/

 ADAS base board + vision daughter card

surround view kit

http://www.spectrumdigital.com/multides-surround-view-kit/

SV kit

 

thanks,
Naren K.
  • 0
    TI__Intellectual 1530 points

    Hi Naren,

    This appears the be the correct kit, however I did want to point out that this is the TDA2x part that doesn't have the ISP integrated in the SOC. If you were interested in that then there is a separate kit that comes with the TDA2PX parts. In this setup the ISP is on the ov10635 cameras that you are purchasing with the SRV kit.

    Regards

    Shashank