66AK2G12: DDR3 EMIF connections

jens duehr

Part Number: 66AK2G12
Other Parts Discussed in Thread: TMS320C6727

Please suggest interfacing scheme should i follow , if i want to connect "DDR3/EMIF" of 66AK2G12 with FPGA and DDR3L device simultaneously. For example as shown in figure suggest is it suitable?

over 6 years ago

0 Yordan Kovachev over 6 years ago

TI__Guru**** 161600 points

Hi,

I've not seen a design where EMIF is connected to both DDR & FPGA. I woudn't recommend doing this.

Best Regards,
Yordan

0 jens duehr over 6 years ago in reply to Yordan Kovachev

Intellectual 260 points

Hi,
My previous board , i used TI DSP "TMS320C6727" EMIF interface and I opted the above scheme which is working fine.
Thats why now i am taking your suggestion for my current Device interface .

Processors

Processors forum

66AK2G12: DDR3 EMIF connections