Part Number: PROCESSOR-SDK-AM335X
Hello,
I want to develop a application using user button. Four Push Buttons, which are available in AM335x Starter kit.
For that, How to configure a button? and How to set Pull up, debounce time, and other necessary things.
Thanks for the reply,
This capture is a part of am335x-evmsk.dts file.
I want to use this switch. There is not define any configuration like pull-up, input/output and other things.
I don't how to configure it. In which file, i required changes and configuration.
Thanks,
Ok, i find out pullup setup for key in am335x-evmsk.dts.
In this configuration, 0x894, 0x890... , what represent it for gpio2_3 , respectively for other gpio.
