• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 254 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6657: SRIO

Nancy Wang
Expert 8210 points

Part Number: TMS320C6657

Hi,

The customer has realized write data from 6657 to FPGA through SRIO, but how to receive data from FPGA? Please help provide demo or key steps.

  • 0
    TI__Guru**** 161600 points
    Hi,

    You could check the ~/ti/pdk_c667x_2_0_12/packages/ti/drv/srio/test/tput_benchmarking test. There is a board to board configuration, see ~/ti/pdk_c667x_2_0_12/packages/ti/drv/srio/test/tput_benchmarking/docs on how to configure it.

    The above example does not provide configurations for FPGA, but rather how to configure the TMS320C6657 in "recieve mode" see the consumer part of the code (again refer to the docs provided in Processor SDK RTOS, paths shown above).

    Best Regards,
    Yordan