• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 244 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Have some problems in modifing the DM355 VPFE driver

旭峰 胡
Prodigy 40 points
Other Parts Discussed in Thread: TVP7002

hi everyone

     I have an Appro IPNC hardware and software,i want to use tvp7002 instead of MT9P031 for inputting. I have files of tvp7002.c and tvp7002.h coming with my dm365 evm board. I am confused how can i use these files in my IPNC hardware  .Are there some examples or documents to help finish this job.

  • 0
    TI__Mastermind 37340 points

    Software for IPNC sold thru Appro is different than DM365 EVM hardware sold thru TI.  If I understand correctly, you want to take source code files provided by TI for our EVM (tvp7002.c and tvp7002.h ) and use them on Appro's IPNC hardware.  If so, you will likely have to port these files over to the V4L2 video driver provided by Appro with their reference design.   It will likely end up looking very similar to the V4L2 driver we provide with the TI EVM.  Are you building your own hardware board that inclues a TVP7002 along with DM365?