• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 362 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM3358: Starter Kit diagnostics

Bhagyashri Sarda
Intellectual 580 points

Part Number: AM3358

Hi,

We are using Beaglebone Black. We want to run diagnostic code on it. We followed the link http://processors.wiki.ti.com/index.php/AM335x_Starter_Kit_Diagnostics#DDR3_DMA_Test_Test

As mentioned in the link, I formatted SD card (F drive on my pc) using HP formatter.  Then opened F drive and copied files 'MLO' and 'app'  into it.  Inserted SD card into beaglebone black.

Started putty at 115200 baudrate.  Powered up the board and pressed the sw5 key near SD card. But nothing was logging on serial terminal. Why diagnostic binary failed to run?