• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM355 Linux 2.6.30 NAND driver issue

Theodore
Prodigy 70 points

Hi folks!

I have compiled a linux 2.6.30 for the DM355 but I'm having trouble with the NAND driver. It reports a huge list of bad blocks yet access to the data seems to work (I can mount, create files, unmount, ...).

Every time I restart the board, U-Boot complains about not finding the bad blocks table and writes a new one, which in turns makes linux unhappy. I guess there is a difference in their ways of handling bad blocks but I have very little knowledge of how this is handled. I tried applying the ECC patches I found on the mailing list but that doesn't change a thing.

 

Anyone could help me on this one?

Thanks alot!

Theo