Original question:
Part Number: BEAGLEBK
Other Parts Discussed in Thread: AMIC110
Hi,
Is there any way to adapt ICE AMIC110 / ICEv2 PDK examples for BBB as I'm planning to use PRU-ICSS for my adapter and a sample code will be great at the beginning.
Best regards
przemek
Hi przemek,
You may start from here for PRU-ICSS example - 
Aslo, more PRU-ICSS examples are here - https://git.ti.com/pru-software-support-package/pru-software-support-package/trees/master
Yes, it's possible to adapt the PDK examples for BBB. The PRU-ICSS firmware/source should be working as is on BBB.
Regards,
Garrett
Hi,
In the "PRU Training..." I did not found any mention about way to use it with ethernet and RTOS which I am looking for.
based on this document i planned to use BeagleBK as adapter/gateway between wireless network and wired Ethernet network [in the future on our own board]. I have searched in the am335x PDK and found onlu ICSS_EMAC_SwichExample and BasicExample for different boards but it is hard to understand what is happening in them.
Regards,
Przemek
