• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 782 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[TDA4M]AR0233 camera sensor bring up

Joe Shen
Expert 3795 points


Hi,

I tried to bring up AR0233 on TDA4EVM board with Fusion board (Rev-B) on PSDKRA-09.00

There is no interrupt reached after the initialization (ub960-ub953-ar0233).

I have checked the status of ar0233 and ub960, the frame count increased. After measured the clock lane and data lane of UB960. There are CSI signal output on oscilloscope.

attched file is the debug patch and log file please help to check and give suggestions.

Regards

Joehttps://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/791/6445.0823.7z