TDA3LA: TDA4x

Rotem Bernstein

Part Number: TDA3LA
Other Parts Discussed in Thread: TDA2

Hello,

I was going through the ISP training in the CDDS. The specified DCC tool seems to assist us with the tuning process.

I found in the RTOS SDK only xml & binary file for specific cameras sensors and various modes, but Unfortunately, I haven't found the DCC tool itself.

Where can I download it? does it come with documentation?

Thanks,

Rotem Bernstein

over 4 years ago

0 Brijesh Jadav over 4 years ago

TI__Guru**** 397370 points

Hello Rotem,

DCC tuning tool is not yet released and will be available soon.

Rgds,

Brijesh

0 Mayank Mangla over 4 years ago in reply to Brijesh Jadav

TI__Mastermind 24525 points

To clarify... TDA3 tool is available but TDA4 tool is under development.

0 Rotem Bernstein over 4 years ago in reply to Mayank Mangla

Intellectual 805 points

Thanks for the quick response.

It was written under TDA3 because there's no "TDA4x" topic in my scroll bar yet.

BTW - Could I get the DCC tool for TDA2, so I'll be able to practice it with my previous EVM until TDA4x DCC will be released?

Thanks,

Rotem Bernstein

0 Mayank Mangla over 4 years ago in reply to Rotem Bernstein

TI__Mastermind 24525 points

Hello Rotem,

TDA2 is an ISP less device, so the tool does not apply. If you are referring to TDA2Plus, then you can use the same tool as TDA3 since the ISP is exactly the same from tuning point of view.

Regards,

Mayank

Processors

Processors forum

TDA3LA: TDA4x