CCS/AM5729: SD card boot

Yan Yandoff

Intellectual 330 points

Part Number: AM5729

Tool/software: Code Composer Studio

Hello!

Given:

1) BeagleBoardX15 (from https://beagleboard.org/x15)

2) Code Compose Studio 9.0.1

3) processor_sdk_rtos_am57xx_6_00_00_07

4) pdk_am57xx_1_0_15

5) JTAG emulator XDS200 Spectrum Digital

6) Windows 7

I have builded loader SBL (from )

Builded multicore example from X:\ti\pdk_am57xx_1_0_15\packages\ti\boot\sbl\example\

How to boot multicore example from SD card without JTAG emulator and with separate SBL project ?

Thanks!

over 6 years ago

0 Rahul Prabhu over 6 years ago

TI__Guru** 116950 points

Yan,

TI Processor SDK RTOS only support AM572x GP EVM and not Beagle board X15 :

http://www.ti.com/tool/TMDSEVM572X?keyMatch=AM572x%20GP%20EVM&tisearch=Search-EN-Everything

The Processor Module on AM572x EVM is similar to Beagleboard X15 but there are some key difference in components and firmware programming that will cause issues in getting the same code to work out of the box on beagleboard X15. Primarily X15 doesn`t program personality EEPROM on the board that provides BoardID that is used by TI SW to detect the characteristics of the HW it is running on.

Please check my discussion here with Marian if you wish to bypass the BoardID detect mechanism to get SD boot using Processor SDK RTOS working in your setup.

https://e2e.ti.com/support/processors/f/791/p/832078/3087728#3087728

TI can`t provide any additional guidance on programming beagleboard X15 as this is not TI supported HW. Please reach out to beagleboard forums for additional assistance.

Regards,

Rahul

Processors

Processors forum

CCS/AM5729: SD card boot