J6PEVM577P: J6PEVM577P: FPD Link 3 output not working on Android (part 2)

AClemotte

Part Number: J6PEVM577P

(Initial thread: https://e2e.ti.com/support/processors/f/791/p/815232/3068821#3068821

We've the Rev C J6+ HW, so we dont have to make any modification on our board.

Regard the i2c command, where we should execute this command? How we can make this command permanent is the SW?

Regards,

over 6 years ago

0 Vishal Mahaveer over 6 years ago

TI__Mastermind 33390 points

Hi,

It's EVM H/W issue, there is no standard way of doing it.
You could try doing it via script in init.jacinto6evmboard.rc. You can refer to the cpuset script in the same file as example.

Regards,
Vishal

Processors

Processors forum

J6PEVM577P: J6PEVM577P: FPD Link 3 output not working on Android (part 2)