1000Base-T and 1000Base-TX support on DM6467,

RY9983

Hello,
I would like to clarify about ethernet function of DM6467
The datasheet (SPRS732f) describes that DM6467 supports 1000Base-TX(P4).
Also, it describes that DM6467 supports 1000Base-T(P252).

- Which functions does DM6467 support, 1000Base-T, 1000Base-TX or Both?
- Do you know about 1000Base-TXE? Does DM6467 support it?

Best regards,
RY

over 14 years ago

0 Varada Bellary over 14 years ago

TI__Expert 5750 points

DM6467 only supports EMAC functionality, that is layer 2, in the form of MII and GMII interface. An external PHY chip is needed for the physical layer interface. You can select this PHY based on the medium you need.

The datasheet will be updated soon.

Thanks and Regards

Varada

0 RY9983 over 14 years ago in reply to Varada Bellary

Guru 10570 points

Hello, Varada

Thank you so much for your help!

Best regards,
RY

Processors

Processors forum

1000Base-T and 1000Base-TX support on DM6467,