TDA4VMXEVM: User Guide for "J7 COMMON PROCESSOR BOARD"

Milovan Vidovic

Prodigy 30 points

Part Number: TDA4VMXEVM

Hello,

my name is Milovan Vidovic from Serbia, and I need your support regarding documentation for :

J721EXCP01EVM:
J7 COMMON PROCESSOR BOARD

I received the board and the processor TDA4V, but I don't have any documents regarding:

1. SDK

2. UART settings

3. Boot settings, modes (SD card etc...), Hardware Pin settings

4. Switch configuration for Video output

I was trying to find it on your site, but without luck.

Thanks in advance for any kind of help,

Milovan Vidovic

over 5 years ago

0 Rishabh Garg over 5 years ago

TI__Guru 55685 points

Hi Milovan,

Do you have PRSDKRA and PRSDKLA package?

If no then you need to get in touch with your TI representative or else you can check psdk_rtos_auto_j7_06_00_00_00/vision_apps/docs/user_guide/index.html.

Regards,

Rishabh

0 Milovan Vidovic over 5 years ago in reply to Rishabh Garg

Prodigy 30 points

Hello Rishabh,

if I understood correctly, PRSDKRA and PRSDKLA packages, are SDK versions, once installed or extracted will give me path like:

psdk_rtos_auto_j7_06_00_00_00/vision_apps/docs/user_guide/index.html.

I will try to find this SDKs...

Thanks for very quick answer,

Milovan

0 Rishabh Garg over 5 years ago in reply to Milovan Vidovic

TI__Guru 55685 points

Hi Milovan,

Yes these are SDKs needed to run on J7.

Can you get in touch with your TI representative for access to these SDKs, they are not available on ti.com yet.

Regards,

Rishabh

Processors

Processors forum

TDA4VMXEVM: User Guide for "J7 COMMON PROCESSOR BOARD"